| No. | Brand | F | A | H | L | T | a | J | b |
| SAW 23518 x 3.1/16 TLC | skf | - | - | - | - | 23,812 mm | - | - | - |
| SAF 22517 T | skf | - | - | - | - | - | - | - | - |
| SAFS 22544 | skf | - | - | - | - | 50,8 mm | 14,2 mm | - | - |
| SAF 22626 x 4.5/16 T | skf | - | - | - | - | - | - | - | - |
| SAFS 23028 KA x 5 | skf | - | - | - | 68 mm | - | - | - | - |
| SAFS 23038 KAT x 6.15/16 | skf | - | - | - | - | - | - | - | - |
| FSAF 1613 x 2.1/8 T | skf | - | - | - | - | - | - | - | - |
| SAFS 22524 x 4.1/4 TLC | skf | - | - | - | - | - | - | - | - |
| SAF 1513-210 | skf | 155 mm | - | - | - | - | - | - | - |
| SAFS 22520 x 3.1/2 | skf | - | - | - | - | - | - | - | - |
| SAF 22544 x 7.13/16 | skf | - | - | - | - | - | - | - | - |
| SAF 23024 KA x 4.1/8 | skf | - | - | - | - | - | - | - | - |
| SSAFS 22544 x 7.1/2 TLC | skf | - | - | - | - | - | - | - | - |
| SSAFS 23048 KAT x 8.1/2 | skf | - | - | - | - | - | - | - | - |
| SAFS 22524 | skf | - | - | - | - | - | - | - | - |
| SAF 22511 x 1.7/8 | skf | - | - | - | - | - | - | - | - |
| SAFS 23026 KA x 4.3/8 | skf | - | - | - | - | 57,15 mm | - | - | - |
| SAFS 23034 KAT x 5.13/16 | skf | - | - | - | - | - | - | - | - |
| SSAFS 22536 x 6.3/8 | skf | - | - | - | - | - | - | - | - |
| SAF 22616 x 2.3/4 TLC | skf | - | - | - | - | - | - | - | - |
| SSAFS 23034 KATLC x 6 | skf | - | - | - | - | - | - | - | - |
| SAFS 22520-11 x 3.3/8 T | skf | - | - | - | - | - | - | - | - |
| SAFS 22517-11 x 2.13/16 | skf | - | - | - | - | - | - | - | - |
| SAFS 22540 | skf | - | - | - | - | - | - | - | - |
| skf SSAFS 23044 KATLC x 7.15/16 SAF and SAW pillow blocks with bearings on an adapter sleeve | duty type:Standard Duty; series:200; manufacturer upc number:793699076752; locking device:Eccentric Collar; housing material:Cast Iron; mounting type:Two-Bolt Flange; seal type:Clearance/Non-C; d:1.2500 in; |
| skf SAF 22526 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve | static load capacity:6410 lbf; dynamic load capacity:8830 lbf; standards met:ABMA; bore type:Round; internal clearance:C0; B:21 mm; fillet radius:1.5 mm; snap ring included:Without Snap Ring; d:35 mm; thrust application warning:This product can not; |
| skf SAFS 22540 x 7.1/4 T SAF and SAW pillow blocks with bearings on an adapter sleeve | harmonization code:8487900040.US; D:2.0870 in; continuous temperature range:-22 to 400°F; pressure tolerance:Ambient; lip material:Labyrinth; misalignment tolerance:0.010 in; width:0.6250 in; typical application:Exceptional Bearing; Weight:0.52 lb; manufacturer catalog number:29607-0367; |
| skf SAF 22617 x 3 T SAF and SAW pillow blocks with bearings on an adapter sleeve | flange type:Non-Flanged Cup; series:L; lubrication hole type:No Hole; material:Chrome Steel; manufacturer upc number:053893654065; D:6.3750 in; cup width:2.1250 in; single or double cup:Double Cup; compatible cone:L624549; finish/coating:Uncoated; |
| 2.438 Inch | 61.925 Millimeter x 4.688 Inch | 119.075 Millimeter x 3.25 Inch | 82.55 Millimeter skf SAFS 22515-11 SAF and SAW pillow blocks with bearings on an adapter sleeve | standards met:ASTM B584-78; overall length:4 in; groove/plug type:None; sleeve bearing type:Plain Sleeve; bearing material:Leaded-Tin Bronze; d:1-7/16 in; material specification:SAE 660 (C932&#; maximum v value:750 fp/min; maximum p value:3000 psi; D:1-11/16 in; Size (mm):2.438 Inch | 61.925 Millimeter x 4.688 Inch | 119.075 Millimeter x 3.25 Inch | 82.55 Millimeter ; |
| skf SSAFS 23056 KA x 10.7/16 SAF and SAW pillow blocks with bearings on an adapter sleeve | ra max.:1 mm; Weight:0,89 Kg; Oil rpm:1300; DE_:103; Da max.:105 mm; Z_:37; hidYobi:RS-4916E4; B_:30; da_max:105; D_:110; |
| skf SAF 22622 x 4 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve | lock nut number:AN18; material / coating:Steel; includes:Lock Washer (W1; taper:1:12; lock washer number:W18; compatible bearing number:22218, 1318, 1218; d:3.1875 in; |
| 1.688 Inch | 42.875 Millimeter x 3.625 Inch | 92.075 Millimeter x 2.5 Inch | 63.5 Millimeter skf SAF 22510 SAF and SAW pillow blocks with bearings on an adapter sleeve | cage material:Brass; series:231; outer ring type:Not Split; B:104 mm; D:320 mm; maximum rpm:2070 rpm; internal clearance:C3; lubrication hole type:3 Oil Holes & Lu; closure type:Open; static load capacity:2220000 N; Size (mm):1.688 Inch | 42.875 Millimeter x 3.625 Inch | 92.075 Millimeter x 2.5 Inch | 63.5 Millimeter ; |
skf SAFS 22518-11 T SAF and SAW pillow blocks with
da. 80.963 mm. Da. 160 mm. Ca. 49.809 mm. A1. 98.425 mm. A2. 206.375 mm. S. 4.763 mm ba. 40.481 mm. H. 196.85 mm. H1. 101.6 mm. H2. 41.275 mm
SAF 22518 - SKF
SAF 22518. SAF and SAW pillow blocks with bearings on an adapter sleeve. JUMP TO SECTION. TECHNICAL SPECIFICATION
SKF - SAFS 22518-11 - Motion Industries
Buy SKF Pillow Block Roller Bearing Units SAFS 22518-11 direct from Motion Industries. Your proven service leader with reliable delivery since 1972
skf SAFS 22518 x 3.1/16 T SAF and SAW pillow blocks with
skf SAFS 22518 x 3.1/16 T SAF and SAW... Bearing No. SAFS 22518 x 3.1/16 T da. 77.787 mm. Da. 160 mm. Ca. 49.809 mm. A1. 98.425 mm. A2. 206.375 mm
SKF - SAF 22518/C3 - Motion Industries
Buy SKF Pillow Block Roller Bearing Units SAF 22518/C3 direct from Motion Industries. Your proven service leader with reliable delivery since 1972
SAF and SAW pillow blocks with bearings on an adapter ... - SKF
SAF and SAW pillow blocks with bearings on an adapter sleeve. Calculation. Start Bearing ... SAFS 22518 TLC. Dimensions ... Recommended safe loads
skf SAFS 22518-11 x 3.1/16 SAF and SAW pillow blocks with
Find the discount skf SAFS 22518-11 x 3.1/16 SAF and SAW pillow blocks with bearings on an adapter sleeve online SAF BEARING LIMITED you 143 mm d1
skf SAFS 22518 SAF and SAW pillow blocks with bearings on an adapter sleeve Video