| No. | Brand | F | A | H | L | T | a | J | b |
| FSAF 1613 x 2.1/4 TLC | skf | - | - | - | - | - | 121,1 mm | - | - |
| SAFS 22534 x 5.13/16 T | skf | - | - | - | - | - | - | - | - |
| SAF 22544 x 7.13/16 | skf | - | - | - | - | - | - | - | - |
| SAFS 22518 x 3.1/4 TLC | skf | - | - | - | - | - | - | - | - |
| SAW 23540 x 7.1/4 T | skf | - | - | - | - | - | 2,06 mm | - | - |
| SSAFS 22538 x 7 TLC | skf | - | - | - | - | - | - | - | - |
| SAW 23524 TLC | skf | - | - | - | - | - | - | - | - |
| SAW 23544 x 7.1/2 TLC | skf | - | - | - | - | - | - | - | - |
| SAFS 22515-11 | skf | - | - | - | - | - | - | - | - |
| SSAFS 23024 KATLC x 4 | skf | - | - | - | - | - | - | - | - |
| SAF 1620 x 3.1/2 | skf | - | - | - | - | 36,512 mm | - | - | - |
| SAF 1622 T | skf | - | - | - | - | - | - | - | - |
| SAFS 22520 x 3.3/8 TLC | skf | - | - | - | - | - | - | - | - |
| SAFS 23026 KATLC x 4.5/16 | skf | - | - | - | - | - | - | - | - |
| SAF 22617 x 3 T | skf | - | - | - | - | - | - | - | - |
| SAF 22511 x 1.7/8 | skf | - | - | - | - | - | - | - | - |
| SAF 22609 x 1.1/2 T | skf | - | - | - | - | - | - | - | - |
| SAF 22517 | skf | - | - | - | - | - | - | - | - |
| SAF 23038 KA x 6.15/16 | skf | - | - | - | - | - | - | - | - |
| SSAFS 23048 KA x 9 | skf | - | - | - | - | - | - | - | - |
| SAF 22516 x 2.3/4 T | skf | - | - | - | - | - | - | - | - |
| SAFS 22538 x 7 TLC | skf | - | - | - | - | - | - | 252 mm | - |
| SAF 22530 T | skf | - | 6 mm | 22 mm | 58 mm | - | - | 24 mm | - |
| FSAF 22615 TLC | skf | - | - | - | - | - | 6.2 mm | - | - |
| skf SAW 23540 x 7.1/4 SAF and SAW pillow blocks with bearings on an adapter sleeve | d2:49.2 mm; Category:Precision Ball Beari; Db max.:66 mm; Cage Material:Phenolic; Limiting speed for grease lubrication:20000 r/min; Calculation factor - f2A:1; db - min.:44.6 mm; ra max.:1 mm; rb max.:0.3 mm; Contact Angle:15 Degree; |
| skf SAF 22518 x 3.1/8 T SAF and SAW pillow blocks with bearings on an adapter sleeve | inner ring width:33 mm; maximum rpm (grease):3200 rpm; Weight / Kilogram:2.665; static load capacity:101000 N; Outer Diameter (mm):200; Static load, C0:101 kN; f0:15.8; outer ring width:33 mm; Internal Special Features:No; Characteristic rolling element frequency, BSF:7.87 Hz; |
| skf SAF 22617 x 2.13/16 T SAF and SAW pillow blocks with bearings on an adapter sleeve | D:42 mm; Weight:0,0965 Kg; C:20 mm; B:20 mm; Bore Diameter (mm):28; Outer Diameter (mm):42; Da max.:40 mm; F:32 mm; Bearing number:NKI 28/20; d:28 mm; |
| skf SAFS 22526 x 4.1/2 SAF and SAW pillow blocks with bearings on an adapter sleeve | thread direction:Right Hand; lubrication type:No Fitting; operating temperature range:-30 to +300 &de; head width:0.281 in; housing material:Steel; head diameter:3/4 in; misalignment angle:6.5 °; grade:Commercial/Indu; radial static load capacity:2300 lb; ball material:Steel; |
| skf SAFS 22517-11 x 2.13/16 SAF and SAW pillow blocks with bearings on an adapter sleeve | manufacturer upc number:782934929724; lubricant:Exxon Ronex MP greas; flange mounting type:Four-Bolt Piloted Fl; seal type:Clearance/Non-C; d:2.6875 in; series:FC; application:Ideal solution for c; housing construction:Cast Iron; locking device:Set Screw; bore type:Round; |
| 2.938 Inch | 74.625 Millimeter x 5 Inch | 127 Millimeter x 3.75 Inch | 95.25 Millimeter skf SAF 22517 SAF and SAW pillow blocks with bearings on an adapter sleeve | replacement bearing:YET 209-112; d:1.7500 in; series:FYT; bore type:Round; housing material:Cast Iron; radial static load capacity:4860 lbf; manufacturer upc number:7316577344601; lubrication type:Lubrication Fitting; D:5.8438 in; operating temperature range:Maximum of +110; Size (mm):2.938 Inch | 74.625 Millimeter x 5 Inch | 127 Millimeter x 3.75 Inch | 95.25 Millimeter ; |
| skf SAF 22544 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve | manufacturer upc number:637401450389; D:1.5000 in; closure type:Open; bore type:Round; B:0.4375 in; d:0.5000 in; |
| skf SAF 23038 KA x 6.7/8 SAF and SAW pillow blocks with bearings on an adapter sleeve | (Grease) Lubrication Speed:4055 r/min; Bore Diameter (mm):90; D:160 mm; Size (mm):90x160x30; B:30 mm; Outer Diameter (mm):160; Basic static load rating (C0):72,1 kN; Basic dynamic load rating (C):99 kN; Width (mm):30; C:30 mm; |
SAF and SAW pillow blocks with bearings on an adapter ... - SKF
SAF and SAW pillow blocks with bearings on an adapter sleeve. Calculation. Start Bearing Calculator for this product ... SAF 1622 x 4 T. Dimensions
skf SAF 1622 x 3.13/16 T SAF and SAW pillow blocks with bearings
The online skf SAF 1622 x 3.13/16 T SAF and SAW pillow blocks with bearings on an adapter sleeve 9500 r/min Limiting speed parts store gives NTN-SNR
skf SAF 1622 x 4 SAF and SAW pillow blocks with bearings on an
skf SAF 1622 x 4 SAF and SAW pillow blocks with bearings on an adapter sleeve SEARCH - Whether it's agriculture 48 mm A or construction equipment your
skf SAF 1622 T SAF and SAW pillow blocks with bearings on an
da. 100.013 mm. Da. 240 mm. Ca. 89.789 mm. A1. 133.35 mm. A2. 273.05 mm ba. 48.419 mm. H. 287.337 mm. H1. 152.4 mm. H2. 60.325 mm. J min. 371.475
SKF SAF1622 Split pillow blocks, SAF and SAW series (inch
da, 100.013, mm. Da, 240, mm. Ca, 89.789, mm. A1, 133.35, mm. A2, 206.375, mm. ba, 48.419, mm. H, 287.337, mm. H1, 152.4, mm. H2, 60.325, mm. J, min
SAF 1622 X 4 T - SKF
Split pillow blocks – SAF and SAW series (inch dimensions) ... SAF 1622 X 4 T. SAF and SAW pillow blocks with bearings on an adapter sleeve
SKF SAF1622x3.7/8T Split pillow blocks, SAF and SAW series
da, 98.425, mm. Da, 240, mm. Ca, 89.789, mm. A1, 133.35, mm. ba, 48.419, mm. H, 287.337, mm. H1, 152.4, mm. H2, 60.325, mm. J, min. 371.475, mm. J, max
skf SAF 1622 T SAF and SAW pillow blocks with bearings on an adapter sleeve Video